top of page
Power Packages

All our van projects have needed a power package created in order allow the owners to operate electrical equipment when out away from plug in power and to plug in to charge from 110 v sources.

We have created power packages for our projects that allow the unit to be plugged in for charging or operate via solar when "off the grid".


They feature solar power and all necessary components to get the most out of the system


We can add an onboard power management system to your van, boat or tiny home.


We can assist you in determining exactly what you need in your new power system based on your uses and needs, then we can be advisors/consultants if you wish to do the work yourself, or we can do the install for you.

Contact us at or call 250-941-6699 to find out what type of power is best for your project to get the job done.

A consulting fee would be applied once we get into the details of your system if you are not getting the work done in our shop. All or part would be refunded upon purchase of any items from us.

An example of a system diagram
Airhead Composting Toilet
Victron Power Consultation.jpg

Click on the image above to view

The “Air Head” Composting Toilet works simply. By separating liquids from solids, the volume of solid human matter is significantly reduced. Air Head’s approximate five-gallon capacity means that up to a season’s worth of weekend use may be held. (Based on solid matter volume for two persons’ use twice every weekend for five months: 80 uses). A liveaboard couple can expect 60 uses (one month) before they’ll have to empty the solids tank.
Much like a household toilet the “Air Head” Composting Toilet has a bowl and an actuator which provides a “flush.” The main difference is the “Air Head” Holding Toilet’s waterless operation. A paper bowl liner acts as a carrier for solid matter on its way to the solids tank.

The solid matter is separated and agitated, thereby decomposing it into a non-offensive state inside the large tank. Additionally, the unit has an integral 12-volt fan that provides a constant negative pressure to pull moisture out of the living space. Even after long lay-ups, there is no “holding tank” smell when you come aboard.
Liquids are collected in the smaller forward tank. Its wide-mouthed aperture will keep the contents emptying smoothly into any standard commode. The liquid tank will hold approximately four days use per person if used exclusively. A low-profile bottle is also available that holds about half the volume of the standard bottle.

Additionally, the “Air Head” may be integrated with an existing holding tank system, creating holding capacity for both solids and liquids far beyond what many medium and small boat owners are used to. This is because the tanks take on no flushing water and are free to hold just what they need to.

There are two Models of this toilet:

Marine - which has the cutaway base (45 degree angle cut in the rear to fit closer to the hull) and the marine seat.

Household - which has the full foot base and the full size residential seat.

There is a choice of side for the actuator handle, and other components that are required before ordering. Please specify which you require. These options are available on our website when ordering. The toilet cost does not vary by option.

To order any products, please click on the link to take you to our online store.     Click this link:

What's Included:
Toilet Bowl
Solid tank with agitator
Solids Tank Lid
Liquid bottle
Crank handle
Composite wood seat
Hold down brackets
Mounting hardware
5′ length of hose
Hose connectors
Fan and fan housing
Paper bowl liners (50)

Click here to purchase
Wheel Well Water Tank

20 Gallon Wheel Well Water Tank is designed to save interior space while increasing safety by distributing weight onto the rear tires for optimal traction. The design is also naturally baffled to decrease water sloshing.
NSF/ANSI 61 Certified

1/2″ FNPT Fittings
Threaded inserts on both ends of tank
Inlet and outlet on front and back for universal installation on either passenger or driver side.

Kit Includes:
Wheel Well Water Tank (20 Gallon)
Mounting brackets.
Not compatible with dually trucks

Capacity: 20 Gallons
Weight: 30 lbs
Length: 50″
Height: 19″
Width: 11″
1/2″ FNPT fittings on both ends of tank and one fitting center on top of the tank
4 – 5/16″ – 18 Threaded Inserts on both ends of tank (gold fittings in image) *4 (total) – 5/16″ (diameter) – 18 (threads per inch)

Click here to purchase
Water tank 1.jpg
water tank 2.jpg
bottom of page